SiS 7018 Audio Dos Driver Setup Readme
--------------------------------------
If you want to have sound under real mode Dos environment, such as MSDOS 6.22 
or Windows95/98->press F8->select Command Prompt only or Windows95/98->Shutdown->
 Restart in MS-DOS Mode. then you need to do the following.

Install DOS Legacy driver by setup utility:
1. To install the driver please run "SETUP.EXE -lg"

Install DOS Legacy driver manually:
1. Copy all the files under this directory and Win95_98\gm10mb.sam to your hard disk drive, 
for example C:\DOSAUD.
2. Please make sure HIMEM is already installed. Add this line in your config.sys
     DEVICE = C:\DOS\HIMEM.SYS
   For Windows, you don't have to do so because Windows loads HIMEM automatically.
3. Add 2 lines in AUTOEXEC.BAT file
     C:\DOSAUD\SNDINIT.EXE/INIT
     C:\DOSAUD\SNDTSR.EXE
   Or you can run SNDINIT.EXE/INIT then SNDTSR.EXE directly under real mode DOS 
   command prompt whenever you want to install the driver.

SiS provide a basic diagnostics under real DOS environment.

 1. Run SNDINIT.EXE without any parameter then press OK to see some
    configuration diaglogs.

 2. Make sure Sound device is enabled and select proper Base Port, DMA
    Channel and SB IRQ that are not being used by other devices.

 3. Enable ADLIB if you want to have wavetable synthesis music for ADLIB
    FM.